Onе-Dау Sаlе: Uр tо 80% оƒƒ Starrett 120M-225 Dial Caliper, Stainless Steel, Yellow Face, 0-225mm Range, +/-0.03mm Accuracy, 0.02mm Resolution
Customer reviews Starrett 120M-225 Dial Caliper, Stainless Steel, Yellow Face, 0-225mm Range, +/-0.03mm Accuracy, 0.02mm Resolution
So you can check out the other reviews Exсluѕіvе Dіѕсоunt 80% оƒƒеr Starrett 120M-225 Dial Caliper, Stainless Steel, Yellow Face, 0-225mm Range, +/-0.03mm Accuracy, 0.02mm Resolution at Amazon.com
only with $
| Brand | Starrett |
| Material | Stainless Steel |
| Range | 0-225mm |
| Measurement Accuracy | +/-0.03mm |
| Resolution | 0.02mm |
- Precise dial graduations of 0.02 mm, with one revolution equivalent to 2 mm
- Thumb-operated fine adjustment roll allows for one-handed use
- Lock screw holds the sliding jaw in position, to ensure consistent measurement
- Rack teeth point down to keep foreign matter from clogging the gear, to help prevent measurement error
- Knife-edge contacts for inside and outside measurements
From the manufacturer
The L.S. Starrett Company, founded in 1880, manufactures more than 5,000 variations of Precision Tools, Gages, Measuring Instruments and Saw Blades for industrial, professional and consumer markets worldwide. Starrett, a manufacturer of fine precision tools in industry for over 130 years.
Starrett 120M-225 Dial Caliper
The Starrett 120M-225 dial caliper measures 0 to 225 mm with 0.02 mm accuracy, and comes in a protective wood case. This handy measuring tool allows for reliable and accurate readings with the sharp, black graduations on the no-glare, satin-finished bar, crisp lines on the yellow dial face, and knife edge contacts for inside and outside measurements. One full revolution of the dial is equivalent to 2 mm. The knife-edge contacts can be used to scribe parallel lines on the workpiece.
- Precise dial graduations of 0.02 mm, with one revolution equivalent to 2 mm
- Thumb-operated fine adjustment roll allows for one-handed use
- Lock bolt holds the sliding jaw in position, to ensure consistent measurement
- Rack teeth point down to keep foreign matter from clogging the gear, to help prevent measurement error
- Knife-edge contacts for inside and outside measurements
Product Description
The Starrett 120M-225 dial caliper measures 0 to 225 mm with 0.02 mm accuracy, and comes in a protective wood case. This handy measuring tool allows for reliable and accurate readings with the sharp, black graduations on the no-glare, satin-finished bar, crisp lines on the yellow dial face, and knife edge contacts for inside and outside measurements.
One full revolution of the dial is equivalent to 2 mm. The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Positive split gear anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls, which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; split gear systems actually split the gear into two gears, each half as thick as the original gear. One of these gears is then fixed to the shaft while the other gear is allowed to turn. The free-turning gear is connected to coil springs that rotate the it until all the backlash in the control system has been eliminated. The rack teeth point down to keep foreign matter from clogging the gear operations. This prevents measurement errors where metal chips could interfere with proper caliper operation.
Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.
Specifications for this item
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut Starrett 120M-225 Dial Caliper, Stainless Steel, Yellow Face, 0-225mm Range, +/-0.03mm Accuracy, 0.02mm ResolutionThе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 80% fоr реорlе whо buу Starrett 120M-225 Dial Caliper, Stainless Steel, Yellow Face, 0-225mm Range, +/-0.03mm Accuracy, 0.02mm Resolution рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "Onе-Dау Sаlе: Uр tо 80% оƒƒ Starrett 120M-225 Dial Caliper, Stainless Steel, Yellow Face, 0-225mm Range, +/-0.03mm Accuracy, 0.02mm Resolution"
Post a Comment